POLYPRINTDTG.COM
INSTALLATION GUIDE
5
NOTE:
Level must not exceed the max indication on the cartridge side.
Fig.7
: TexJet
®
shortee² cartridge filling process.
CAUTION:
Fill them slowly as each cartridge has many chambers.
|
03
_STEP
Put back only the rubber seal that holds the ink. Make sure air supply is
not sealed.
|
04
_STEP
Use a syringe to remove air from the cartridge. Hold it as shown in the
picture at next page and pull ink until cartridge filter is full of ink.
Fig.8:
Ink cartridges air tap position.
