PolyKeg PRO one-way keg, Insruction Manual

Page: 18 / 39

MI01 Rev. 08 dated 14/01/2021
This document is property of PolyKeg
®
S.r.l. - Unauthorized copying and use is strictly forbidden.
18 Instruction manual - PolyKeg Pro |
SECTION 6
POLYKEG PRO WITH BAG
Filling instructions with PolyKeg
®
manual kit
6DQLWL]LQJ
4. Gas and product tube
connection
Disassemble the PolyKeg
®
ȴOOLQJNLW
and sanitize the components as
indicated in the “Sanitizing
Instructions”section.
FIG. 1
FIG. 4
FIG. 2
FIG. 5
FIG. 3
FIG. 6
Connect the product and gas
WXEHVWRWKHȴOOLQJNLW
PREPARATION
2. Assembly
5. Gas and product tubes
FRQQHFWLRQZLWK.YDOYH
3. Gas and product
pressure check
6. Product tube purging
Reassemble the kit properly and
close all valves.
K-VALVE ONLY
Connect the product and gas tubes
WRWKHȴOOLQJNLW2SHQWKHUHGYDOYH
&KHFNWKDWWKHSUHVVXUHVRIWKHȴOOLQJ
system are correctly set and below
the maximum value indicated.
(3.5 bar/50 psi).
Work with the product valve to
remove any residual gas from the
product tube. Close the product
valve.
MAX 3.5 BAR
MAX 50 PSI
CO
2
N
2