background image

2

OWNER′S MANUAL

EN

DISTRIBUTED BY: Polygroup

®

 Trading Limited. Unit 606, 6th Floor, Fairmont House, No.8 Cotton Tree Drive, Central, Hong Kong.

For questions and issues, contact Customer Service at +1 (888) 919-0070 from 8AM to 5PM MST, Monday-Friday.

Extended operating days and hours during peak season requirements.

Polygroup

®

 Trading Limited (hereinafter “Polygroup

®

”) makes products at the best quality we are able to offer. Polygroup

®

 is pleased to 

offer warranty for the repair or replacement of pool products for 180 days from the date of purchase. The provisions of this Limited 

Warranty only apply to the original purchaser. Please keep your original store sales receipt, as this proof of purchase will be required and 

must accompany warranty claims to Polygroup

®

 or its designated agents. This Limited Warranty does not apply without proof of purchase; 

or should the purchaser modify or repair the product themselves or by unauthorized people; use non-Polygroup

®

 parts or accessories with 

the product; use the product in contravention of the manufacturer’s instructions; use improper voltage; abuse the product in any way; or 

through accident or negligence. This Limited Warranty will not cover consequential damages, including claims for loss of water, pool 

chemicals, damage, or labor, normal wear-and-tear; nor acts of God outside the control of Polygroup

®

. Non-manufacturing defects, such 

as grasses that may grow through the ground cloth and/or pool liner are examples of which Polygroup

®

 cannot be held responsible for.

IN NO EVENT SHALL Polygroup

®

, ITS AUTHORIZED AGENTS, RELATED ENTITIES, OR EMPLOYEES BE LIABLE TO THE BUYER 

OR ANY OTHER PARTY FOR DIRECT OR CONSEQUENTIAL DAMAGES. Some states or countries, or other jurisdictions, do not allow 

the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
This Limited Warranty is not extended to close-outs, factory seconds, or resold products (i.e. garage sales, online auctions, or online 

retailers not purchased directly from Polygroup

®

). Any issues with items purchased from these types of vendors / sellers will need to be 

addressed through these stores. Items purchased from seasonal stores will be treated with an “All Sales Final” Policy.

Limited Warranty

Should you encounter a problem with your Polygroup

®

 Product, DO NOT return the product to the place of purchase. All warranty claims must be made 

directly to Polygroup

®

. For any setup and troubleshooting issues, visit support.polygroupstore.com. Customer Service: +1 (888) 919-0070.

You may be asked to return all or part of the product for inspection and/or repair. Do not return any product to Polygroup

®

 without a Return Merchandise 

Authorization number.

DO NOT RETURN PRODUCT TO STORE

For answers to common questions, setup videos and

troubleshooting tips, visit support.polygroupstore.com

or call Customer Service: +1 (888) 919-0070

To order parts and

accessories, visit

polygroupstore.com

READ AND KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE

EN

SUMMER WAVES

®

SAND FILTER PUMP

FOR ABOVE-GROUND SWIMMING POOLS

ST1100 (10”) / ST1600 (12”) Models

TABLE OF CONTENTS

Warnings 

Preliminary Steps, Pump Power Information & Part List 

Setup Instructions 

Use Of Pump 

Pump Motor Care & Pump Maintenance & Pool Water Care 

Troubleshooting Guide

Winterizing, Disassembly & Storage  

6-Port Valve - Parts List & Setup 

ASME Compliant Suction Fitting Info 

3 ~ 6

7 ~ 8

9 ~ 13

14 ~16

17

18

19

20 ~ 22

23 ~ 24

Summary of Contents for SUMMER WAVES ST1100

























Reviews: