FILTER PUMP MODEL
Filter System
WATTAGE
115 watts
AMPERAGE
1.4amps
FILTER PUMP POWER INFORMATION
PARTS LIST
PRELIMINARY STEPS
FILTER PUMP IMPORTANT NOTES
QTY.
1
1
1
1
1
1
1
1
1
1
1
1
1
PARTS NAME
Motor Seal Nut
Rubber Nozzle / Gasket
Pump Motor Assembly
Motor Seal / Canister Gasket
Top Cover
Weir Foam
Filter Cartridge
Weir
Filter Pump Skimmer Canister
O-ring for Hose
Connections
Hose Clamp
Return Hose
Elbow 90°
QTY.
1
1
1
1
1
1
1
1
1
1
1
1
1
PARTS NAME
Return Fitting Lock Nut
Return Fitting Washer
(RF Washer)
Pool Wall (for reference only)
Fitting Gasket
Pool Wall Fitting
Return Fitting Diverter
Locking Ring
Return Fitting Service Plug
Skimmer Seal Ring
Water Stopper
SFX Skimmer Strainer Basket
Skimmer Gasket Rubber Seal
GFCI Power Cord Set (image reference only)
ITEMS
ITEMS
1
2
3
4
5
6
7
8
9
1. READ ALL INSTRUCTIONS CAREFULLY and get a thorough understanding of what is required to assemble your SFX series Filter Pump.
2. Before you begin to assemble the pool, identify, count, and check all parts needed for assembly.
3. It is recommended that you have some PETROLEUM JELLY on hand for lubricating the gaskets.
1. Installer shall follow written instructions provided for operation of the filter pump systems.
2. All electrical components shall be installed in accordance with Article 680 of the National Electrical Code (NEC) “Swimming Pools, Fountains and Similar
Installations” or its latest approved edition.
3. The Type D Filter Cartridge
7
will hold as many as 2 of the 1” diameter chlorine tablets and the Type A/C Filter Cartridge
7
will hold as many as 6 of the 1”
diameter chlorine tablets. Check your chlorine levels to determine the proper number of chlorine tablets to add. The filter cartridge will automatically dispense chlorine
into the pool as the Filter Pump runs. You must have the type of Filter Cartridge with a central core mesh divider (See page 8) to use the chlorine dispenser.
DO NOT use this to dispense powdered chlorine, shock treatment or any other type of chemicals as damage to the pump, filter cartridge, and pool will occur.
4. The SFX Series Filter Pump systems are manufactured by Polygroup
®
and ETL control number 4000608 and 4006317 - double insulated and grounded - 120 Volts
A.C. - 60 Hz. (ALL Units must have a minimum of 105 Volts A.C. to start and run properly.)
OWNER’S MANUAL
Should you encounter any problems, contact Customer Service at (888) 919-0070 from 8 AM to 5 PM Mon. thru Fri.
MST. Extended operating days and hours during peak season requirements.
7
