Polycom Ceiling Microphone Array Setup Sheet
10
For suspended ceilings (continued)
9
10
11
12
7.6 m (25’)
(Do not use the non-plenum
straight-through
3.1 m (10 ‘) cable)
For ceilings that are not suspended
To attach the electronics enclosure, use suitable
hardware for your ceiling type. Align the
enclosure so that, when the Microphone Array
is attached, the dot on the Microphone Array
points toward the main display, as shown in
Step 12 on this page.
Point the dot (located on the band around the
middle of the microphone ball) toward the main
display.
Note that the ceiling microphone array boxes
and cables are above the suspended ceiling.
