on this type of command. The minimum and maximum values for this command are 0 and 20 or 30,
respectively.
This command is saved to non-volatile memory only as part of a preset. The state of this command
will be restored after power-up only if a preset is saved and that preset is set to be the power-on
preset.
Example
Description Status Message
Q01GAINIA10
Set gain on
input A to 10
dB.
Q01GAINIA10
Q01GAINIA?
Query the
gain on
input A.
F01GAINI2xB01GAINITxS01GAINIAxQ01GAINIAxT01GAINITx
,
where
x
is a number between 0 and 30, depending on the current
setting of the gain on input channel A.
Q01GAINI*6
Set gain on
all inputs (1,
A, B) to 6
dB.
Q01GAINI*èèè
Q01GAINI*ìää
Set gain on
input
channels A
and B to 0
dB and gain
on input
channel 1 to
9 dB.
Q01GAINI*ìää
Q01GAINI*?
Query gain
on all inputs
(1, A, B) .
S01GAINI*abc
, where
a
-
c
are each between
ä
and
ÿ
, depending
on the current setting of the gains for each of the three input
channels.
8.49.
GAINO
-- Set Output Gain
This command sets or queries the gain (in dB) of the three output channels (1, A, B) .
This command is a channel integer command. See
Section 6.3
and
Section 6.2
for more information
on this type of command. The minimum and maximum values for this command are -100 and 20,
respectively.
This command is saved to non-volatile memory only as part of a preset. The state of this command
will be restored after power-up only if a preset is saved and that preset is set to be the power-on
preset.
Example
Description
Status Message
Q01GAINOA10
Set gain on output channel A to 10
dB.
Q01GAINOA10