background image

Page 4 of 4

Polycom RN616.doc

Upgrade procedure

1) Use a web browser to connect to the V

2

IU appliance

2) Go to Upgrade firmware use page defaults
3) Press “Submit”
4) Follow the progress of the upgrade using the "refresh the upgrade status" link.
5) When the Write process begins, please heed the warning:

WARNING!!! Do not change the configuration or power off the device until the write is 100 percent
complete. The device may become unusable if the write is interrupted.

6) The system will automatically restart after the new image has been loaded.  After the
upgrade process has completed, check that the new version number is displayed on the
main System page.

Obtaining Further Assistance

Please contact Polycom Technical Services for assistance.

Summary of Contents for V2IU4300T

Page 1: ...ease refer to the information below for details Supported Platforms VOS version 6 1 6 is released for the following V2 IU products 4300T 5300 E10 5300 E25 5300 S10 5300 S25 6400 S85 New Features Added per call maximum bandwidth limit for H 323 User can now configure the per call maximum bandwidth that an endpoint is allowed to use If the endpoint requests more bandwidth the call is rejected Provid...

Page 2: ...idth fixes o Save and display entered maximum total bandwidth Previously displayed a calculated value which showed rounding error o Correctly show total bandwidth even a maximum isn t enforced o Apply the system wide maximum bandwidth cap if specified Fix bug where Set Link page always displayed a link rate of Autonegotiate even if previously configured differently Fix memory leak in H 460 support...

Page 3: ...or the remaining VLANs LAN link up down SNMP traps for 4200 and 4300 are supported for LAN port 1 only Dial plan download limitation with multiple levels of cascaded EPs and EMs Dial plan download is a Survivability feature where using Broadsoft switches the V2 IU will automatically download the subscriber dial plan when a phone registers with the softswitch This dial plan is then used during Loca...

Page 4: ...begins please heed the warning WARNING Do not change the configuration or power off the device until the write is 100 percent complete The device may become unusable if the write is interrupted 6 The system will automatically restart after the new image has been loaded After the upgrade process has completed check that the new version number is displayed on the main System page Obtaining Further A...

Reviews: