Polycom SoundStation Premier, Installation Instructions And User Manual

Page: 13 / 24

Enhanced Sound System Installation Instructions and User’s Guide Addendum
2-5
Transmitter Set-up:
1. Place the rechargeable battery pack (provided) into the transmitters battery compartment
located on the front of the unit.
2. Observe the correct polarity which is clearly marked in the battery compartment.
3. Set the transmitter into the recharging bay on the SoundStation Premier Satellite. It is
recommended that the batteries be charged for 8 hours before use. Standard AAA batteries can
be used but are not rechargeable, and pose no problems if the transmitter is docked in the
recharging bay.
4. Explanation of Console LEDs (indicator lights)as viewed while facing the unit.
LEFT LED
-transmitter indicator
▼
A green LED indicates an established wireless communications link. A flashing red LED
indicates the wireless microphone is muted.
▼
No LED lite indicates no wireless communication established.
This can be an indicator of
a) Dead or no batteries in the transmitter or
b) the transmitter is out of range.
RIGHT LED
-indicates transmitter charging
▼
A green LED indicates the transmitter is charging.
▼
No LED lite indicates the transmitter is either not docked in the console, or non-rechargeable
standard AAA batteries are in use.
▼
The LED at the center of the console indicates power is being supplied to the unit.
▼
The LED on the transmitter indicates low batteries when flashing.
Power switch
LED