Mute Your Microphone
Press
on the remote control or
on the table
microphone.
End a Call
1
Press
on the remote control.
2
If prompted, confirm that you want to hang up.
Place a Multipoint Call
To place a multipoint call when in a bridge call:
●
Place a call, then press
on the remote control
or select
, and then select
Place a Call
to
place a call to the next site. Repeat until all sites
are connected.
●
Call a group from the Contacts.
●
Call one or more sites, and then ask those sites
to call additional sites.
Adjust the Volume
Press
or
on the remote control.
Adjust the Video Layout While in a
Call
To adjust the video layout that the far-end sites see on
their monitors during a point-to-point or multipoint call:
1
With your remote control, select
> Layout.
2
Select Browse.
Select one of the available layouts.
Select or Adjust a Camera
●
While in a call, select
> Cameras
and either
Near Cameras
or
Far Cameras
. The menu
disappears and a message displays, telling you
which camera you are controlling.
●
To pan or tilt the selected camera: on the remote
control, press the left, right, up, and down
navigation buttons (not available with all
cameras).
●
To control cameras without accessing the menu:
press
or
on the remote control (not
available with all cameras).
Start and Stop Video In or Out of
Calls
●
To stop video, using the local interface, go to
> My Video
and select
Camera Off
. A video
pause icon appears on the display.
●
To start video, using the local interface, go to
> My Video
and select
Camera On
. The video
pause icon disappears from the display.
Power the System On and Off
●
To power on the system, press
on the remote
control or the power sensor on the front of the
system.
●
To power off the system, press and hold
on
the remote control or the power sensor on the
front of the system for 3 seconds. Wait
15 seconds before you unplug the power cord.
More Information
For more information about setting up and using the
system, refer to
support.polycom.com
.
Tips and Tricks
●
Make sure you know the name or number of the
site you want to call.
●
Connect and test any additional equipment
before the meeting.
●
Avoid wearing bright colors, all-light or all-dark
clothing, or “busy” patterns. Light pastels and
muted colors look the best on the screen.
●
Adjust your camera so that the far site can see
you. Fill the screen with people rather than with
the table, chairs, walls, lights, or floor.
●
Adjust your microphone so that the far site can
hear you. Mute the microphone before moving it.
●
Make sure that you can see and hear the far-site
participants.
●
Introduce all participants when the meeting starts.
Speak in your normal voice without shouting. Use
natural gestures when you speak.
●
Don’t tap on the microphone or rustle papers near
the microphone. In a multipoint call, mute your
microphone when you are not speaking.
