Polycom MGC Administrator, Administrator'S Manual

Page: 323 / 584

MGC Administrator’s Guide
5-87
conferences will run on the Audio+ card and not on the Standard Audio.
If set to NO (default), T1-CAS participants will not be able to join a
video conference.
•
IDLE_CODE_T1_CAS = 0X55
This is an Idle code (silent), which decides that no more DTMF (the
phone number for T1CAS) will be received, and time-out is invoked.
• T1CASDTMFTIMER2 = 3
The time (in seconds) the MCMS waits after 1 DTMF is received, before
it decides that no more DTMF (the phone number for T1CAS) will be
received, and time-out is invoked.
•
AUTOMATICALLY_ALLOCATE_DIAL-IN_NUMBERS_IN_
MEET_ME_CONFERENCE_FOR_T1-CAS_SERVICE = YES
Set this flag to YES (default) to allow the system to automatically
allocate T1-CAS dial-in numbers to Meet Me Per Conferences or
Meeting Rooms in addition to ISDN numbers. This flag is required only
in a unified (mixed environment) MCU. If this flag is set to NO, you can
still manually allocate T1-CAS dial-in numbers (in the Meet Me Per
Conference tab).
• T1CAS_PHONE_LEN = 4
Enables the MCU to reduce the delay during T1-CAS dial-in connection.
When this flag is set to 4 (default), the system assumes that the fourth
DTMF code received completes the phone number sent by the endpoint
and continues the connection process. When this flag is set to 0, the
system ignores this flag and allows a longer delay. Possible values are 0
to 10.
Section NET8_PARAMETERS
• COUNTRY_CODE = COUNTRY_NIL
Enter the name of the country in which the MCU is located.
• IDLE_CODE_T1 = 0X13
This is the Idle code (silent), which is transmitted on the ISDN T1 B
channels, when there is no transportation on the channel.
• IDLE_CODE_E1 = 0X54
This is the Idle code (silent), which is transmitted on the ISDN E1 B
channels, when there is no transportation on the channel.