11
The figure below shows an example of how to complete the required fields.
Registering Handsets
To configure specific handsets with identities so that they can make calls:
1.
Under the
Administration
menu, select
DECT
and then select
Users
.
2.
Select
New
. An
Edit User
dialog box will appear.
3.
In the
Long Name
field, enter any name.
4.
In the
Name
field, enter the identity (extension). Refer to
Gathering Information on page 6
for
instructions on locating the identity. No spaces are allowed.
5.
In the
Number
field, enter the SIP identity address (extension). Refer to
Gathering Information
on page 6
for instructions on locating the SIP identity address.
6.
In the
Password
field, enter the SIP authentication password. Refer to
Gathering Information on
page 6
for instructions on locating the SIP authentication password.
7.
In the
Display Text
field, enter a standby text. This is displayed on the handset. This can be the
identity or a name to identify the location of the handset.
8.
In the
IPEI
field, enter the IPEI number (serial number) of the handset. Refer to
Gathering
Information on page 6
for instructions on locating the IPEI.
9.
In the
Auth Code
field, if you previously selected
With User AC
in
Configuring the DECT
System on the KWS600v3 on page 9
, enter the numerical access code.
10.
Select
Apply
.
11.
Repeat Steps 1 through 10 for each new handset to be registered to the system.
12.
Select
OK
to save the registration(s).
