Polycom Conference Composer User Manual Download Page 27

Page: 27 / 29

ODEM

WITH

THE

ORTEX

Conference Composer User Guide

ODEM

WITH

THE

ORTEX

ONFERENCE

OMPOSER

You will need Conference Composer version 1.62 or later. You can find the latest
version of the software on our website at www.aspi.com, on the Vortex page.

ITE

WITH

THE

ORTEX

At the local site with the Vortex, use Conference Composer to enable the modem to
auto answer:

1. On the O

PTIONS

page, choose the default initialization string from the I

NITIAL

IZATION

TRING

pull-down menu. If a default is not listed, enter the following

string:

ATE0F1&B1S0=2

2. Enable the initialization string by clicking on the E

NABLE

button.

3. Disconnect the RS-232 cable from the Vortex and connect it to your modem.

You may need to use a null modem for your modem. Connect your modem to the
Vortex.

4. Cycle power on the Vortex. As it powers up, it will send the initialization string

to the modem. Make sure the modem is On before cycling power on the Vortex.

If you don’t have Conference Composer on site,

1. Using a terminal program, send the following strings to the Vortex:

F**MINISTRATF1E0&B1S0=2
F**MINI1

This will enter the initialization string and enable it.

2. Disconnect the RS-232 cable from the Vortex and connect it to your modem.

You may need to use a null modem for your modem. Connect your modem to the
Vortex.

3. Cycle power on the Vortex. As it powers up, it will send the initialization string

to the modem. Make sure the modem is On before cycling power.

Figure 19.

Modem settings on Conference Composer O

PTIONS

page.

Summary of Contents for Conference Composer






























Search results

Summary of Contents for Conference Composer

Reviews:

Related manuals for Conference Composer

Brands by name

Popular brands

Polycom Conference Composer, User Manual

Search results

Summary of Contents for Conference Composer

Reviews:

Related manuals for Conference Composer

Brands by name

Popular brands