Hang Up a Held Call and Accept a Call
Depending on how your system is set up, you can end the call that was on hold the longest and add an
incoming call to the conference.
Procedure
»
Select
Hang Up + Accept
.
The oldest held call is ended and the incoming call is added to the conference.
Hang Up All Calls
When you are in a conference call, you can hang up one call at a time or hang up all calls at once.
Procedure
1.
Press
.
2.
Select
Leave Conference
.
Passwords for Conference Calls
Depending on how a conference call is set up, you might be required to enter a meeting password to join
the call. You can also require far-end systems to enter a meeting password to prevent unauthorized
participants from joining conference calls hosted by your system.
Keep the following points in mind regarding meeting passwords:
▪ Audio-only endpoints are unable to participate in password-protected calls.
▪ Microsoft Office Communicator clients are unable to join password-protected conference calls.
▪ SIP endpoints are unable to dial in to password-protected conference calls.
Set Up a Meeting Password
You can set up a meeting password to ensure only authorized participants can join the meeting.
Procedure
1.
From the Home screen, press
.
2.
Navigate to
Settings > User Settings > Meetings
.
3.
Enter a password in the
Meeting Password
field in one of these ways:
▪ Press the remote control number buttons.
▪ Use the on-screen keypad.
4.
Press
to save your changes and return to the Home screen.
Calling
18
