FIGURE 3
FIGURE 5
FIGURE 6
FIGURE 4
ASSEMBLY INSTRUCTIONS
4
SEE FIGURE 4
INSERT ONE END OF A BENCH BRACKET ASSEMBLY INTO A BENCH HORIZONTAL (see FIGURE 3).
DEPRESS THE SNAP BUTTON ON THE ASSEMBLY AND SPIN THE BENCH HORIZONTAL TUBE UNTIL THE HOLE
LINES UP WITH THE BUTTON. THE BUTTON WILL CLICK INTO PLACE. BE CAREFUL: THIS IS A PINCH POINT (see
FIGURE 4).
INSERT THE OTHER HORIZONTAL OVER THE OTHER STRAIGHT END OF THE BENCH BRACKET ASSEMBLY
UNTIL THE BUTTON SNAPS INTO PLACE. INSERT THE OTHER ASSEMBLY INTO THE HORIZONTALS ORIENTED
PER FIGURE 5 (HOOKS ARE FACING DOWNWARD).
HOOK THE COMPLETED BENCH SUPPORT OVER THE RINGS OF THE TWO TOWERS. SET THE BENCH TOPS
ON THE BENCH SUPPORT (see FIGURE 6). CAUTION: CHECK STABILITY BEFORE LOADING.
BENCH HORIZONTAL
BENCH BRACKET ASSEMBLY
DEPRESS BUTTON
