- Constant red until end of action Lock has successfully locked
- Constant green until end of action Lock has successfully unlocked
- Constant white for 3 seconds Switched on, current flows
- Red light flashes every 5 minutes Critical battery status
- Constant purple firmware is updated
- Blue light flashing Settings are changed/stored
Button commands
By pressing the button (hole on the upper part of the screen) page of the Danalock), the following commands are triggered. Do not allow more than 5
seconds to pass until next time, otherwise the entry will be lost. and the corresponding command is activated.
1x green Activating the pairing mode
Puts the Danalock V3 into pairing mode in order to connect it via other radio standards. to control it, press button once and wait 5 seconds until the lock
turns green flashes. Now you have 30 seconds to connect the V3 with a gateway.
2x yellow Manual adjustment
