• For stubborn dirt, return the handle to the
vertical position and press down on the rear
bristles of the floor brush (
J
) with your foot,
scraping the dirt. After which, tilt the handle
and brush over again normally (Fig. 7).
• To clean rugs and carpets, rest the brush
(with the cloth attached) on the special frame
(
K
) so that it can slide over the surface.
Warning:
- To remove the cloth from the brush,
unplug the power supply from the elec-
tric socket and wait a few minutes to
allow the cloth to cool.
LACK OF WATER
The water level is always visible thanks to the
transparent tank.
When the water inside the tank (
D
) has been
used up, steam will stop being released.
To restart operations, just fill up the water
tank (
D
) again, as described in the paragraph
“PREPARATION”.
Warning: This must always be done after
having disconnected the appliance from
the mains.
PRECAUTIONS FOR DELICATE
SURFACES
• Before treating leather, special fabrics and
wood surfaces, consult the manufacturer’s
instructions and always carry out a test on a
hidden part or on a sample of the material.
Allow the steamed part to dry to make sure
that no changes in colour or deformations
have occurred.
• Please pay careful attention when cleaning
treated wood or terracotta flooring, as pro-
longed use of steam may damage the wax,
polish or colour of the surfaces to be clea-
ned.
We therefore recommend adjustment the
steam to minimum (if your appliance has
steam adjustment) and never direct the jet
of steam directly on the surface, but cover
the brush with a cloth. Do not keep spraying
steam in the same place.
• Also on particularly delicate surfaces (e.g.
synthetic materials, lacquered surfaces
etc.), the brush should always be covered
with a cloth.
STORING THE DEVICE
Before replacing the appliance:
- Unplug the power supply from the mains.
- Completely empty the water tank (
D
) to
avoid water leaks.
- Before detaching the cloth from the brush,
wait a few minutes to allow it to cool.
- Wind the power cable around the special
cable rewinds (
B
) and (
C
).
Warning:
- Before using the appliance again,
remember to unwind the power cable
completely. The upper cable winder (B)
rotates 180° in order to wind up the
power cable quickly.
- Do not keep the appliance connected to
the power supply with the cable wound
up.
CARE OF YOUR APPLIANCE
•
Before carrying out any maintenance on
the device, always unplug it from the
power mains making sure that the pro-
duct has cooled down before procee-
ding.
• To clean the body of the appliance, simply
use a moist cloth. Do not use solvents or
detergents, which may harm the body ma-
terial.
• The cloths provided can be washed by fol-
lowing the instructions included on the
label.
18
VAPORETTO SV100
ENGLI
SH
VT SV100 - PRELIMINARE - M0S10996 - 1U06_vers7:FEV 1000-950.qxd
26/06/2014
15.03
Pagina 18