V A P O R E T T O E C O P R O
the button (
U
) forwards. Steam will keep on
coming out, even releasing the button. To inter-
rupt the outlet, move the button (
U
) backwards.
By turning the steam flow control knob (
I
) you
can vary the amount of steam according to the
type of textile to be ironed (more or less deli-
cate). You can use this control to increase the
steam flow by turning in an anti-clockwise direc-
tion. Turning the control in clockwise direction
reduces the steam flow.
6d. The iron can also be used in a vertical position
e.g. for removing creases from curtain, cloth-
ing etc.
7d. For dry ironing, push the accessory on/off
switch (
C
), regulate the temperature of the iron
by turning the knob (
S
) to the required tempera-
ture for the fabric shown on the knob itself.
IMPORTANT
• Do not leave the iron unattended whilst connect-
ed to the mains.
• Iron only on heat resistant surfaces on and on
surfaces that allow the steam to escape e.g.
mesh ironing boards.
• If you accidentally drop your iron, you should
have it checked by an authorized Polti Service
Centre because some internal malfunctionings
might have occured, limiting the safety of the
product.
C
C
C
C
A
A
A
A
U
U
U
U
T
T
T
T
II
II
O
O
O
O
N
N
N
N
S
S
S
S
•
For cleaning leather, wood or delicate fabrics
especially dralon, velvet and other pile surfaces,
consult the manufacturers instructions. Clean
only by using the hand gun at a safe distance to-
gether with a soft cloth and always do a test on
a non visible part of the item first or on a sam-
ple. Allow the test area to dry completely before
observing results and effects on surface or
colour before proceeding to clean further areas,
ensuring that exactly the same distance and
technique are applied as for the test area. If in
doubt, and on sensitive surfaces like fabrics,
leather and wood it is always better to ask ad-
vice from your Steam Cleaner dealer.
•
For cleaning wood surfaces (furniture, doors etc.)
take great care as too long an application of the
steam could alter the waxed appearance, the
shine or the colour of the surfaces cleaned. We
therefore recommend you apply the steam on
such surfaces only for brief periods or to clean
these surfaces using a cloth first held in the steam.
•
Please pay particular attention while cleaning
brick floors: a too long application of steam
could damage wax, brightness or colour of
these surfaces.
•
Delicate surfaces (e.g. synthetic materials, lac-
quered surfaces etc.) we recommend that the
small brush should always be covered with at
least two cloths to reduce the intensity of the
steam, and (on machines with steam variation
control) with the steam set at low level.
•
If cleaning glass surfaces in particularly low
temperatures preheat the glass using the hand
gun from about 50 centimetres distance from
the surface to be cleaned.
•
For care of your plants vaporise at a minimum
distance of 50 centimetres.
T
T
T
T
II
II
P
P
P
P
S
S
S
S
F
F
F
F
O
O
O
O
R
R
R
R
B
B
B
B
E
E
E
E
T
T
T
T
T
T
T
T
E
E
E
E
R
R
R
R
U
U
U
U
N
N
N
N
II
II
T
T
T
T
P
P
P
P
E
E
E
E
R
R
R
R
F
F
F
F
O
O
O
O
R
R
R
R
M
M
M
M
A
A
A
A
N
N
N
N
C
C
C
C
E
E
E
E
STEAM GUN (2)
The steam gun can be used directly on all spots re-
quiring a stronger, closer treatment without con-
necting the brushes. The more resistant the stain,
the closer you should hold the gun; the steam pres-
sure and temperature being higher at the source.
You should however always wipe with a dry cloth (or
a slightly abrasive sponge-if the spot is a difficult
one to remove) after using the gun.
The steam gun is particularly efficient at:
- breaking down rug and carpet stains before they
are treated with the large brush;
- cleaning stainless steal surfaces, panes, mirrors,
enamelled surfaces;
- cleaning hard-to-reach corners, such as stairs,
window sills, door posts;
- cleaning window shutters, heaters, car interiors;
- spraying plants (from a distance);
- removing odours and creases from clothes.
To reach higher points, the steam gun can be con-
nected to one or both extension tubes.
LARGE BRUSH (8)
Use the large brush (
8
) with one or two extension
tubes (
7
) on all large washable surfaces. To wash
floors, put a clean, dry kitchen cloth under the brush
and swing back and forth without applying any pres-
sure. Use the other side of the cloth when the first
one is impregnated with dirt. Use the brush directly
without the cloth on particularly dirty or incrusted ar-
eas and in spaces between the tiles: swing the
brush sideways to detach the dirt. Highly obstinate
stains may require a steam gun treatment before
the brush and cloth are used (an old bath towel is an
ideal cloth) . The same procedures apply to ceilings
and vertical surfaces, like wallpaper: in this case the
cloth can easily be fastened around the brush and
held in place by the 4 clips (
9
) on the brush itself.
Smooth cotton cloths are suitable for the treatment
of glass surfaces: fasten the cloth around the brush
Summary of Contents for VAPORETTO ECO PRO 3000
Page 1: ...R...
