VAPORELLA FOREVER 610 - FOREVER 615 PRO
29
ENGLISH
PREPARATION FOR USE
• Remove the water tank (
3
) from the appli-
ance (fig.1).
• Remove the dip tube (
4
) from the tank
(fig.2).
• Fill the water tank with water up to the MAX
level marked on the water tank.
Normal tapwater can be used. In hard wa-
ter areas we recommend the use of KAL-
STOP, a special natural-base decalcifier
which inhibits and breaks down limescale,
making it easy to remove just by swilling out
the tank with a little tapwater.
Do not use demineralised water alone, but
mix it with tap water as described above.
Never use distilled water or scented wa-
ter.
• Reposition the dip tube
(4)
inside the water
tank
(3)
.
• Reinsert the water tank
(3)
until you hear
the hook click.
• Connect the cable plug to an earthed power
supply of the correct voltage.
• Press the ON/OFF switch (
1
); the ON indi-
cator light (
2
), pressure indicator light (
5
)
and iron heating indicator light (
11
) will
come on.
• The sound emitted on switching on your ap-
pliance and periodically during use, is due
to the water refilling system and is quite
normal.
INSTRUCTIONS FOR USE
Check the manufacturer’s label on the gar-
ment, and interpret the symbol on the label as
follows:
STEAM IRONING
• Regulate the iron temperature using the
iron temperature control (
7
) to the tempera-
ture required by the fabric (fig. 4).
• Wait for both the pressure indicator light (
5
)
and the iron heating indicator light (
11
) to
go out (about 3 minutes). Push the button
(
10
) on the iron to release bursts of steam
from the holes on the soleplate. Release
the button and the steam flow stops.
NOTE:
during initial operation of the iron, a
few drops of water mixed with steam may
come out of the soleplate until the tempera-
ture stabilises. It is advisable to direct the
first jets of steam onto an old cloth until a
uniform jet of steam is obtained.
CONTINUOUS STEAM JET BUTTON
For Vaporella Forever 610
• To have a continuous jet of steam, press
and move the button backwards
(10a)
(Fig.5). The steam will continue to come out
even when the button is released. To inter-
rupt the supply, move the steam button
(10a)
forward (Fig 5a).
For Vaporella Forever 615 PRO
• In order to have a continuous steam jet,
move the button (
10a
) forwards. Steam will
keep on coming out, even releasing the
steam request button. To interrupt the ou-
tlet, move the button (
10a
) backwards
(fig.6).
NOTE:
• Both (
5
) and (
11
) lights go on and off during
operation; this is quite normal and means
that the electric resistance is operating to
maintain constant the pressure in the boiler.
• If no steam is released from the iron, check
that the steam pressure light (
5
) is off.
IRONING WITHOUT STEAM:
• To dry iron, regulate the iron temperature
using the slider
(7)
to the temperature re-
quired by the fabric (fig.4).
• When ironing without steam, be careful not
to press the steam button (
10
) as water
may leak out of the plate.
Steam ironing allowed
For dry ironing, set thermostat (7) on •••
Steam ironing allowed
For dry ironing, set thermostat (7) on ••
Check the fabric's resistance to steam
ironing or dry iron with thermostat (7) set
on •
- do not iron
- steam ironing or treatment not allowed
VL FOREVER 610-615 PRO - M0S10282 1S04_7:FEV 1000-950.qxd
18/05/2012
14.13
Pagina 29
