E
NGLI
S
H
| 20 |
1.
PREPARATION FOR USE
1.1 Place the boiler on a stable, level surface that can withstand
high temperatures.
1.2 Remove the self-filling tank lid (1) and fill the tank with about 1.2l
of water, making sure that it does not overflow.
Thanks to the continuous refill system you do not need to stop the
ironing and wait for the appliance to cool down because the tank
can be filled as needed.
1.3 Replace the lid.
1.4 Gently pull the power cable (2) out and connect it to an
appropriate mains socket (3) that is earthed. Always use the
product with the cable completely unwound.
1.5 Press the ON/OFF switch (located on the side of the
machine) (4). The indicator light (
) and the “Iron heating”
indicator light will turn on.
2. IRON TEMPERATURE ADJUSTMENT
Silence Eco Friendly 19.55 / 19.50 model the temperature
adjusts automatically based on the type of fabric to be ironed.
Silence Eco Friendly 14.55 / 14.45 Model
Before ironing an item of clothing, always check the symbols
on its label, for the instructions provided by the manufacturer.
Check, based on the following table, the most appropriate type
of ironing:
3. STEAM IRONING
3.1 Make sure that chapter 1 has been completed.
3.2 Silence Eco Friendly 19.55 / 19.50 Model select the type of
fabric to be ironed, turning the steam adjustment dial (6), the
iron automatically adjusts to the optimal temperature.
Follow these instructions to adjust the steam pressure (6):
Sint-Silk-Dry Acetate, Acrylic, Velvet, Nylon, Silk, Viscose,
Polyester clothes.
Wool wool clothes.
Cotton Cotton clothes and Jeans.
Linen linen clothes.
Silence Eco Friendly 14.55 / 14.45 Model adjust the temperature
of the iron (5) as described in Chapter 2. Adjust the pressure of
the steam, turning the steam adjustment dial (6), based on the
type of fabric to be ironed, following these instructions:
Level 1 synthetic or delicate fabrics.
Level 2 wool and silk.
Level 3 cotton, jeans and linen.
3.3 Theindicator light (
) will start to flash indicating that the
boiler is heating.
3.4 Wait until the indicator light (
) is constant and the heating
indicator light of the iron is off.
3.5 Press the steam button (7) on the iron to make steam come
out of the holes on the plate. Releasing the button, the flow
stops. Proceed to iron the garments.
3.6 To have a continuous jet of steam move the button forward
(8). The steam will continue to come out even when the button
is released. To interrupt the supply, move the button backward
(8).
4. VERTICAL IRONING
It is possible to use the iron vertically to remove creases from
fabrics and/or to freshen up the fibres, eliminating possible
residual odours.
Hold the iron vertically, push the steam button (7) and touch the
fabric slightly with the soleplate, if the type of fabrics allows it.
ATTENTION: Do not place the hot iron on any surface.
Vaporella is equipped with an iron rest mat with soft non-slip
inserts designed to resist high temperatures.
The indicator lights “Iron heating” turn on and off during use.
This indicates that the electrical resistor has started to work to
keep the pressure of the boiler steady. This is a normal
occurrence, and it is therefore possible to continue ironing.
When first using the steam, there may be some drops of water
leaking out of the plate, this is due to imperfect thermal
stabilization. We therefore recommend that the first jet of
steam be directed onto a cloth (clean rag).
Divide the laundry according to the symbols on the garment
labels or according to the kind of fabric. Always start ironing
with the garments that require the lowest temperature, in
order to reduce the waiting times and avoid the risk of burning
the fabrics.
ATTENTION: For low temperature we do not recommend the use
of steam since water could come out from the holes on the
soleplate. For medium temperature alternate the use of steam and
dry ironing to avoid water leaking from the holes on the soleplate.
High temperature – cotton, linen:
Set the iron temperature adjustment knob to the position
•••
Medium temperature – wool, silk:
Set the iron temperature adjustment knob to the position
••
Low temperature – synthetic, acrylic, nylon, polyester:
Set the iron temperature adjustment knob to the position
•
- Do not iron
- Steam ironing and steam treatment not allowed
The sound emitted on switching on your appliance and
periodically during use, is due to the water refilling system and
is quite normal.
preliminare VL SILENCE FRIENDLY 14.45-14.55-19.50-19.55 - M0S11301 - 1P09:UNICO
29/09/2015
12.09
Pagina 20
