E
E
N
N
G
G
L
L
I
I
S
S
H
H
45
MONDIAL VAP SPECIAL CLEANER
• Pull the lid upwards (
22
) as shown in fig. 2
to release it.
• Lift the water container (
25
) pulling it out of
its housing by the container handle (
26
),
moving the unit socket door (
24
) aside as
shown in fig. 3.
• Press the water container handle (
27
)
opening lever and pull (fig. 4).
• Remove the water filter assembly (
28
)
(fig. 5) and fill the container (
25
) with about
0.5 l ordinary tap water.
• Add one dose (a full cap) of antifoam (
38
)
to the water.
• Put the filter assembly (
28
) back in the wa-
ter container (
25
) in its initial position.
Close the container handle (
26
), ensuring
it is closed properly.
• Put the water container back, proceeding
in opposite order to the above and making
sure that the air hose present on the water
filter assembly is aligned with the connec-
tion on the appliance.
• Put the lid back (
22
), aligning the two
levers on the lid with the two seats on the
appliance, turning the lid to connect it.
P
P
R
R
E
E
P
P
A
A
R
R
I
I
N
N
G
G
T
T
H
H
E
E
D
D
E
E
T
T
E
E
R
R
G
G
E
E
N
N
T
T
• Open the cable winder pins (
11
).
• Insert the detergent rack (
14
) in its hous-
ing (
13
) (fig.1A).
• Fill the tank (
33
) with some properly di-
luted detergent and place it in the rack
(
14
).
• Insert the detergent tank cap with dip tube
(
34
), screwing it in carefully (fig.1B).
• Insert the auto priming tube (
34a
) inside
the hole on the cap (
34
) (fig.1B).
CLEANING PRODUCTS:
We recommend use of cleaning products from
the Polti HP007 PROFESSIONAL line only, as
they are specifically designed and tested for
use with Mondial Vap steam appliances.
Refer to product labels for information on dilu-
tion percentages and how to use Polti HP007
PROFESSIONAL products.
CAUTION:
• Never use foamy or acidic cleaning products,
as they could damage the components in-
side the appliance.
• Never use cleaning products containing
muriatic acid, ammonia or products classified
as irritant, as use of irritating products with
steam increases their volatility so that they
can be hazardous to the health if inhaled.
•
Problems caused by use of cleaning
products other than those recommended
above will not be covered by the guaran-
tee.
O
O
P
P
E
E
R
R
A
A
T
T
I
I
O
O
N
N
• Open the unit socket door (
24
); plug in the
unit plug (
B2
) all the way, without pressing
the button, until you hear the mechanism
click together, then check that it is con-
nected properly (fig. 6).
• To disconnect the unit plug (
B2
) from the
appliance, press the button (
B3
) and pull
the unit plug away from the appliance.
• Plug into a suitable electrical outlet.
Operation with Steam + Suction
• Press the main switch (
1
) below the con-
trol panel. The first level on the vacuum in-
dicators (
10
) will start to flash.
• Press the boiler on button (
2
). The boiler
ON indicator light will go on (
4
).
• Wait until the pressure indicator (
6
) goes
on.
NOTE:
the detergent switch (
35
) must be
turned off, so that the indicator light (
37
) is
green. Mondial Vap is now ready to pro-
duce steam.
• Press the steam button (
A5
) on the han-
dle to dispense steam. You can start
vacuuming at the same time by press-
ing the vacuum button (
A4
).
• You can start vacuuming either by press-
ing the ON button (
8
) on the control panel
or by pressing the vacuum button (
A4
) on
the handle (
A2
) for two seconds.
Note:
The handle (
A2
) has a safety button
(
A3
) which prevents accidental dispensing
of steam by children or people unfamiliar
with operation of the appliance. If you
need to leave the appliance temporarily
unattended while it is on, lock the safety
M.V.SPECIAL CLEANER - M0S07056 2O10 8 LINGUE:Layout 1
20/11/2008
11.57
Pagina 45
Summary of Contents for MONDIAL VAP SPECIAL CLEANER
Page 1: ......
