Polsen ULW-96, Product Manual

Page: 15 / 24

15
MOUNTING THE ULW-96
Both the receiver and the transmitter mount via a two-way belt clip, allowing you to attach them upside-down. Being able to
mount the body-pack at a variety of angles is helpful when multiple units are in use, especially when on the same person, as it
reduces the risk of intermodulation.
Note : When manipulating the belt clip, be careful not to bend it out of shape.
Receiver
Shoe adapter
:
The receiver comes with the shoe adapter pre-attached. A 1/4
"
-20 threaded socket in the shoe adapter allows for
additional mounting options.
To mount the receiver to your camera
:
1. Loosen the adapter’s locking wheel and slide the mounting foot all the way into your camera’s shoe mount. Make sure to
position the receiver so the antenna doesn’t enter your image frame.
2. Tighten the locking wheel until secure.
3. Use the included 1/8
"
(3.5 mm) audio cable to connect the receiver’s audio output to your camera’s microphone input.
To remove the shoe adapter
:
1. Push outward on the belt clip at one of the hinges so one side of the clip pops out.
2. Remove the shoe adapter.
3. Reinsert the belt clip.