New Giant (Hong Kong) Limited
www.poloso.com
1) The USB plug an end of insert charger or computer USB port, the other end
insert mobile power input port.
2) According to the amount of charge how much, Indicator light sequence
Permanent bright;
3) All the indicator light permanent bright; charging completed, Remove
charger;
Power supply operation
1) Choose appropriate charge plug, will RFBB8 and Electricity consumption
equipment charging cable for connection.
2
）
Start to charge for electrical equipment. Indicator light. Permanent bright;
3
）
Indicator light according to mobile power Remaining power in sequence Put
out;
4
）
Check electrical equipment till charging completed, turn off the switch,
charging finished.
Supplemental instruction
1) The product does not support charging and discharge at the same time.
2) If because a short circuit caused by the product inside protection, Need to
restart the switch or Charging for products;
3) Standard configuration use 25cm micro charging cable and micro turn apple 1A
Conversion joint;
(No transmission function)
Troubleshooting
Please use the following steps if RFBB8can not charge for your device.
1. Verify that RFBB8 has been charged completely.
2. Check if USB charging cable is connected with power bank.
3. Check you the digital device if installed the battery.
(Some digital device can not work if not installed battery)
4. Check whether your digital device is designed with charging input voltage limited
