Before You Call For Service…
Troubleshooting Tips
Save time and money! Review the charts on the following pages first and you may not need to call for service.
CAUTION: For your safety DO NOT attempt repair of electrical wiring, gas piping, remote control, burners, vent
connectors or other safety devices. Refer repairs to qualified service personnel.
CAUTION: Make certain power to water heater is “OFF” before removing protective cover FOR ANY REASON.
CAUTION: Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper and
dangerous operation. VERIFY PROPER OPERATION AFTER SERVICING.
Problem
Possible Cause
What To Do
Not enough or no hot water.
Water Shutoff valve is not fully
opened.
l
Check shutoff valve and open fully.
Hot water faucet is not fully opened.
l
Open how water faucet completely.
(The main burner goes off when
incoming water volume is
Water piping is frozen.
l
Allow piping to thaw.
No electricity or water supply is cut
off.
l
Check that proper power is being
supplied and/or water supply is
adequate.
Unit is not "ON".
l
Turn the unit "ON" by the button
The temperature may be set too low.
Mixing Valve Malfunctions
(if applicable)
l
Check and replace if necessary.
Error code displayed on remote
controller.
l
See instructions for Error Code and
if required, contact a dealer for
Not enough water demand.
Water inlet filter clogged.
Fixture aerator is clogged.
l
Clean aerator.
Scale build up in heat exchanger.
l
Check for error code. If required,
Hot and cold water lines reversed.
Water not hot enough.
The temperature may be set too low.
l
Check and open the gas valve fully.
The gas valve is not fully opened.
l
Call your gas company to verify
the gas meter and gas piping size.
Gas supply pressure is low.
l
Call dealer for service.
Bleed over in one of the hot water
fixtures.
l
Decrease the temperature setting.
Water too hot.
Temperature is set too high.
Water shutoff valve is not fully
opened.
l
Allow more water to flow.
Small amount of water has been
heated.
l
Normal operation. There is no need
to call for service.
Fan continues to rotate after hot water
faucet is closed.
This function is to supply hot water
when the hot water faucet is reopened.
l
Normal operation. There is no
32
