P O L K A U D I O / M O M O D E S I G N
5
Installing the Components
The Polk/MOMO System Crossovers
You will need to make wiring connections from your amp or radio to the crossovers and
from the crossovers to your mid/woofers and tweeters. Choose crossover box locations that
are convenient for making these connections. As there are adjustments on and in the
crossover networks which you will need to access during the “fine tuning” stage of the
installation, place them in a spot that’s easy to get to. Once you’re done fine-tuning
the system, the crossovers can be hidden away and secured.
Do not install into
doors due to potential water damage. This is not covered under
Manufacturer’s Warranty.
Your Polk/MOMO Series crossovers have clearly marked terminals. The wires provided with
your Polk/MOMO System have one red as the positive (+) lead and one black as the nega-
tive (–) lead. Connect the red to the positive (+) terminals on your crossovers as well as to
the positive (+) terminals of each speaker. Connect the black to the negative (–)
terminals on your crossovers as well as to the negative (–) terminals of each speaker.
