Polini 250WH, Use And Maintenance Manual

Page: 4 / 8

!
CAUTION - avoid any deposit of dirt on the connections of the battery
chargers and connectors.
!
CAUTION - a possible interruption during the recharging operation
does no damage the battery/ Bottle battery.
!
CAUTION - after every charge close the rubber on the socket of the
battery.
ABOUT THE CHARGER LED LAMP
Charger connected into the outlet and battery/ Bottle battery under charge
– RED Power led /RED charge led
Charger connected to the network and battery/ Bottle battery charged
(recharged ended) - RED Power led /GREEN charge led
Time to recharge a dead Bottle battery is about 2,5 hours.
BOTTLE BATTERY COMPATIBILITY:
E-P3+/E-P3+ MX motors with 500Wh EVO (Check the label on the back
of the battery).
TECHNICAL DETAILS:
-Capacity: 250 Wh
-Voltage: 36V-7Ah
- Working temperature: Charge 0° +45°C/ dead: -20°+60°C
- Storage temperature: 1 year:-20+25°C/ 3 months -20+45°C
1 month:-20+55°C
- Air Humidity: 45-70%
- Weight: 1600 g
- Size equal to a 600ml bottle
- Charging time: 2,5 hours
- Color: matt grey
- USB port to be connected to pc, tablet, phone or other devices to be used
as POWER BANK
- Safe assembly with fixing systems made by Polini Motori
INSTALL AND REMOVE THE BOTTLE BATTERY
!
CAUTION - Always turn the battery off before removing or installing it.
INSTALLAZIONE DELLA BOTTLE BATTERY:
1. Insert the bayonet connecting cable in the bottle battery paying
attention to the inserting direction.
2. Place the bottle battery in its support and fix it with the Velcro strap
bracket
3. Connect the cable to the 500Wh battery
REMOVE THE BOTTLE BATTERY:
1. Unlock the bayonet connector connected to the 500Wh battery
2. Remove the safety Velcro strap bracket from the frame
3. Remove the Bottle Battery from its support paying attention not to
drop it
CLEANING THE BATTERY/BOTTLE BATTERY
•
Do not use thinner or other solvents to clean any of the products.
These substances may damage the surfaces.
•
Use a damp cloth, with the water well wrung-out, when cleaning
the battery/ Bottle battery and plastic cover.
•
Batteries/ Bottle battery are not guaranteed against natural wear
or deterioration from normal use.
•
This battery/Bottle battery has been designed to be fully
waterproof and to be used when raining while properly installed
on the bicycle. Do not put the battery in contact with water when
not installed on the bicycle because the electric terminals, in these
conditions, are not protected.
•
The battery/Bottle battery must not come into contact with water
when installed because the electric contacts, in this condition, are
not protected.
•
Do not clean the battery/Bottle Battery using high pressure water
jets. If the water penetrates inside the parts, some problems may
result.
•
Before cleaning the E-Bike, always remove the battery/Bottle
Battery.
!
IMPORTANT NOTICE:
For safety, carefully read this users’ manual before using and follow it
for correct use.
•
Go to the place of purchase or to a bicycles’ dealer for information
on the installation and adjustment of the products which are not
included in this manual.
•
This product must not be disassembled or modified by unqualified
personnel.
•
Use the product according to the local laws and regulations.
!
CAUTION - The use of NON Polini batteries, chargers or other
aftermarket accessories compromises the regular operation of the system
and can cause damage, and also invalidate the original warranty.
IMPORTANT SAFETY INFORMATION
!
DANGER - How to handle the battery/bottle Battery
• Do not deform, modify and disassemble the battery/Bottle battery.
Do not apply welding on the battery/Bottle battery itself. Doing
so may cause leakages, overheating, bursting or ignition of the