polimek SG55, Installation And Maintenance Manual

Page: 10 / 31

10
:
:
:
YES NO
YES NO
1
2
3
4
5
6
7
8
YES NO
1
2
3
4
5
6
7
8
9
PRODUCT INSTALLATION / DELIVERY CONTROL FORM
DATE :
SIGNATURE :
DATE :
SIGNATURE :
TURNSTILES ARE FREE OF SCRATCHES, DENTS OR OTHER DAMAGE
ALL PHOTOCELLS ARE FREE OF OBSTRUCTION/ No direct sunlight on Master sensors
FAIL SAFE EXIT CHECK:
WINGS OPEN AUTOMATICALLY (HG AND SG) OR OPEN EASILY BY HAND (PG) WHEN
POWER IS CUT OFF
POWER LEAKAGE TEST:
CHASSIS/METAL PARTS ARE FREE OF AC VOLTAGE LEAKAGE MEASURED IN REFERENCE TO
GROUND
SAFETY PHOTOSENSOR CHECK:
WINGS REMAIN OPEN IF A PERSON STANDS IN THE MIDDLE OF THE LANE
FREE PASS MODE CHECK:
INDICATORS TURN GREEN. WINGS OPEN AUTOMATICALLY WHEN A PERSON ENTERS THE
LANE AND CLOSE UPON EXIT
EMERGENCY INPUTS (CONTINUOUS NC CONTACT - EMG mode active when open):
WINGS OPEN, ALL INDICATORS TURN GREEN, PERIODIC ALARM SOUND
WINGS OPEN AND CLOSE SMOOTHLY
WITHOUT EXCESSIVE NOISE OR VIBRATION
CONROL INPUT A AND INPUT B:
INDICATORS TURN GREEN IN DIRECTION OF PASSAGE ; RED X ON THE OPPOSITE SIDE
MASTER DIAGNOSTICS SCREEN FREE OF ERROR CODES
APPROVED BY REPORTED BY
REMARKS
POWER ON:
ALL INDICATORS LIT, BUZZERS SOUND, WINGS CYCLE ONCE AND STOP IN STANDBY
POSITION
REMARKS DESCRIPTION
NORMALLY CLOSED (NC) INPUT
-Remove jumper when
connected to fi re alarm system-Normally open (NO) in units
produced before April 2016
HG AND SG MODELS HAVE RGB ILLUMINATED WINGS
AND LED STRIPES UNDER TOP LID
PASSAGE LANE AND PHOTOCELLS MUST BE CLEAR
DURING START UP
DESCRIPTION
:
INSTALLATION CHECKLIST
FUNCTIONAL CONTROL CHECKLIST
ALL COVERS AND PANELS ARE CORRECTLY INSTALLED
MASTER / SLAVE DATA CABLES
AND CONTROL INPUTS ARE CORRECTLY CONNECTED
:
PRODUCT MODEL NO
:
INSTALLER HAS POLIMEK TECHNICAL TRAINING CERTIFICATE
ALL WIRING IS PROPERLY LAID OUT AND CONNECTED
TURNSTILES ARE PROPERLY POSITIONED / ALL ANCHORING BOLTS ARE
TIGHT AND SECURE
INSTALLATION SURFACES FLAT AND EVEN WITH SUFFICIENT STRENGTH
POWER CABLES ARE PROPERLY GROUNDED AND INSULATED
INSTALLATION LOCATION
NAME OF INSTALLER
INSTALLATION DATE
SERIAL NUMBER
FIRMWARE VERSION
CONTROL AND SECURITY SYSTEMS MANUFACTURER