Polestar CD-SMF User Manual Download

Page: 20 / 216

P a g e

| 20

•

Updated validation for automatic upgrade mode and related time settings.

•

Hide video call button when video call is disabled.

•

Updated mute icon position in call page to avoid misunderstanding.

•

Updated the contact would be called using the first active account, not the last used account.

•

Added a note for direct dial widget when there is no contact.

•

Updated USB upgrade LED display to fast red flash. [CD-SMF MWI LED Status]

•

Updated "São Paulo" time zone to UTC-3.

•

Updated the attended transfer button to

“Transfer now” during a call.

•

Improved device audio quality during a call.

•

Updated Chromium/integrated browser for integration with their webRTC app.

•

Added Presentation app.

•

Added Accessibility in Settings. The features originate from the Android system.

Firmware Version 1.0.1.19

•

Supported sending messages from contact detail page by adding the SMS button. [SMS]

•

Supported ability to query a LDAP contact in an emergency call.

•

Improved that call forward has higher priority over DND.

Firmware Version 1.0.1.14

•

This is the Initial Version.

Summary of Contents for CD-SMF

























































































































































































































Search results

Summary of Contents for CD-SMF

Reviews:

Related manuals for CD-SMF

Brands by name

Popular brands

Polestar CD-SMF, User Manual

Search results

Summary of Contents for CD-SMF

Reviews:

Related manuals for CD-SMF

Brands by name

Popular brands