Polestar 2 2020, Manual

Page: 218 / 568

Detach the key blade by angling it up.
Return the key blade to its intended position
in the key after use.
Refit the shell by pressing it downward
until a clicking sound is heard.
Then slide the shell back.
> A further click will indicate that the shell is
securely attached.
Related information
• Locking and unlocking with the detachable
key blade (p. 218)
• Key (p. 208)
Locking and unlocking
with the detachable
key blade
The removable key blade can be used to unlock
the car from the outside – if there is no power to
your car or the key battery is discharged, for
example.
Unlocking
The alarm is triggered when the car is unlocked
with the key blade.
Pull out the front door handle on the left-
hand side to its end position so that the lock
cylinder become visible.
Insert the key in the lock cylinder.
Turn clockwise 45 degrees so that the key
blade is pointing straight back.
Turn the key back 45 degrees to its starting
position. Remove the key from the lock cyl-
inder and release the handle so that the rear
section of the handle is resting against the
car again.
5. Pull out the handle.
> The door opens.
Locking
The doors have a lock switch at the end which
must be depressed using the key blade – these
are then mechanically locked/blocked to pre-
vent them being opened from outside.
218 Key, locks and alarm