10
11
12
9
8
7
Fixing The Head
Connecting Power
Final Balance
Adjustment stop range
Mounting The Monitor Clamp & Monitor
(Both monitor & clamp are optional extras)
Fix the monitor to the clamp then fi x
both of them to the fi rst pole.
Run the cables fi rst. They should reach
to the end of the fi rst pole.
Mounting The Joystick
Plug the cable into the Joystick fi rst as this is a
safer method of mounting.
The head slides onto the fi nal tube and is fi xed by hand tightening
the large nut. Make sure the cables that have been fed up the poles
are routed through the slot in the top of the head drop arm.
Connect the 12 pin lemo and the camera monitoring cable.
Fix your selected camera to the cradle using the supplied camera
mounting screw, balance the camera weight as much as possible
within the cradle.
Saddle bags are provided for power supply or batteries depending on your
specifi c requirements. They are fi tted with Velcro that will fi x to the top
plate on section one of Polecam.
Use the strain relief strap as shown for any cables routed away from the rig.
An integral threaded bar is incorporated within section one
of Polecam and is used for mounting standard dumbell
weights. Add weights as required to balance Polecam. The
fi nal adjustment to achieve a perfectly balanced Polecam rig is
done via the tripod mounting block which is fi tted with Tefl on
bearings to aid smooth and easy movement.
Polecam Starter Pack is supplied with a mains unit that has three
4 pin XLR’s that will provide power to the head/joystick, monitor
with one spare for accessories (dependent on camera used).
For hints and tips on how to
set up your Polecam,
Check out our Youtube video.
http://www.youtube.com/
watch?v=Kw_EsdP9Ajo
Slacken the ratchet clamp (ensuring the rig is horizontal) and gently
ease the rig backwards or forwards to achieve your desired balance
point. When fi nished tighten the ratchet clamp.
Contact Us
Polecam Ltd
12 Wolseley Road,
Woburn Road Industrial Estate,
Kempston,
Bedford,
MK42 7TN
England
+44 (0)1234 855 222
+44 (0)1234 855 270
www.polecam.com
12 pin lemo
BNC for
video monitoring
Head fi xing nut