User Guide
P. 6
*Runtime Options (once the car has been remote started)
FUNCTION
BY PRESSING
ICON
GAS
DIESEL
4 minutes
9 minutes
ENGINE RUNTIME
15 minutes
20 minutes
25 minutes
30 minutes
LCD Transmitter Operation (Second Car Control)
Basic Vehicle Operation
FUNCTION
BUTTON PRESS
ICON
BUZZER
DESCRIPTION
LOCK
+
1 Beep
Locks the doors
and arms the Starter Kill (if
installed) and the alarm.
UNLOCK
+
2 Beep
Unlocks the doors and disarms
the Starter Kill (if installed) and
the alarm.
START
+
+
Melody
Starts the engine
STOP
+
None
Melody
Stops the engine
Start and Stop While in Safe Start Mode
FUNCTION
BUTTON PRESS
ICON
BUZZER
DESCRIPTION
START ON SAFE
START MODE
+
X 2
+
Melody
Press the
and buttons
simultaneously
twice
within
3 seconds.
Press for 1 second (a melody
will be heard) then press 1sec
and a melody will be heard
again.
STOP ON SAFE
START MODE
+
None
Melody
Remote-Starting Your Vehicle
Setting Your Vehicle into Ready Mode
This product is designed for vehicles with a
manual
transmission only. In order to start the vehicle
by remote, the unit must first be set to ready mode. If the unit is not set to ready mode, it cannot
remote-start the vehicle. Once the system is set to ready mode, the vehicle can be remote-started
and stopped at wish. The system will exit ready mode if a door or the hood is opened, if the brake
pedal is pres sed, if the parking brake is disengaged or if the ignition key is turned to the
IGNITION ON
(RUN)
position.
To set the system to ready mode:
1.
Ensure that all the doors are closed and that the shifter is in the neutral position.
2.
With the engine already running, apply the parking brake and release the brake pedal.
Make sure to release the brake pedal.
3.
Within 20 sec. press
LOCK
, or
UNLOCK
.
The parking lights will flash 3 times quickly and remain lit.
4.
Remove the key: the engine will go on running.
5.
Exit the vehicle and close the door.
