EN-20
Setting the Scene Mode
By simply selecting one of the available 19 scene modes, you can capture the image
with the most appropriate settings.
1. Press the
button.
2. Select the desired scene mode with the
e
/
f
buttons, and press the
OK
button.
3. Compose your image and press the shutter
button.
Setting Manual White Balance
This manually sets the white balance and stores it. Use this feature if one of the
pre-selected white balance lighting settings does not produce overall good image
quality for the lighting used in your image.
1. Toggle the
button to [
].
2. Press the
button.
3. Select [White Balance] with the
c
/
d
buttons, and press the
OK
button.
4. Select [Manual] with the
c
/
d
buttons, and press the
OK
button.
5. Select [New WB] with the
c
/
d
buttons, and press the
OK
button.
To use the previously set white balance data, select [Use Data], and press the
the
OK
button.
6. Place a white paper in the middle of the scene, with all lights that will be used in the
photo turned on. Zoom in on the paper, so it almost fills the frame. Then, select
[Execute] from the Manual WB menu.
This establishes for the camera exactly what white should look like under the
current lighting conditions, and it will adjust its white balance accordingly.
The setting is memorized and will remain if the camera is shut off then back on.
P
Summary of Contents for PoGo CZA-05300B
Page 1: ......
