Polaroid PDC 4350 User Manual Download Page 66

Page: 66 / 67

Polaroid

PDC 4350

Digital Camera User Guide

www.polaroid-digital.com

• Regulatory Information

FCC Notice

This device complies with Part 15 of FCC Rules. Operation is subject

to the following two conditions: (1) This device may not cause harmful

interference, and (2) This device must accept any interference received,

including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved

by the party responsible for compliance could void the user’s authority

to operate the equipment.

NOTE: This equipment has been tested and found to comply with the

limits for Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications.

Summary of Contents for PDC 4350




































































Search results

Summary of Contents for PDC 4350

Reviews:

Related manuals for PDC 4350

Brands by name

Popular brands

Polaroid PDC 4350, User Manual

Search results

Summary of Contents for PDC 4350

Reviews:

Related manuals for PDC 4350

Brands by name

Popular brands