performances of the product, never use it in too cold, too hot, too dusty or humid places,
especially:
Moist or underwater conditions
Near the heater or hi-temperature services or solarization
Places apt to fall
Never disassemble the combination audio; otherwise, it may invalidate the warranty.
Buttons description
1: “V+” button: Short press to increase volume; Long press for Next track
2: Multi-function button (MFB): Power on/power off/answer a call/end a call/reject a call/
pause/play music
3: “V-” button: Short press to decrease volume; Long press for Previous Track
4: LED indicator
5: Micro USB charging port
6. Built-in microphone
FUNCTION OF LED INDICATOR
A.
When charging
RED LED is on when the battery is charging.
RED LED is off when battery is fully charged.
B.
When usingthe earphone
RED and BLUE LED blink alternately when the headphone is in pairing mode.
Stand By mode: the LED rapidly flashes BLUE.
Music playback mode: LED flashes slowly in BLUE.
RED LED blinks with sound alert when the battery has low power.
CHARGING BATTERY
The headset comes with a built in rechargeable battery. Before using it for the first time we
recommend you charge the battery fully. Only use the supplied micro USB cable to charge the
headset. Please charge for 3 hours.
Connect the micro USB connector of the charging cable into the micro USB port on the side of the
headphone. Connect the other end of the USB cable to your computer’s USB port or to an
optional USB wall charger (not included)
The RED LED indicator light is illuminated.
The RED LED indicator light shuts off when the speaker is fully charged.
SWITCHING ON / OFF
Switch ON:
Press and hold the MFB for about 5 seconds, until the LED flashes BLUE. You will hear
a vocal message « Power ON » in the earphone.
Switch OFF:
Press and hold the MFB for about 3 seconds, until the LED flashes RED. You will hear
a vocal message « Power OFF » in the earphone.
