●
Channel Switch
Use the number buttons to choose the desired channel directly or press
【
CH+
】
/
【
CH-
】
on the panel or
【
CH
+
】
/
【
CH
-
】
on the remote control to select the channel number. If a channel
number is in SKIP ON mode, the next channel will be displayed.
A maximum of 3 digits can be keyed in at one time with the number button on the remote
control. The symbol of
“
- -
”
on the upper-right corner represents tens and one
respectively.. ,two digits are only admitted if a number input is beyond the range and the
number for hundred digit is bigger than
“
2
”
.The first input number is for hundreds, if it is
“
1
”
,
“
1- -
”
appears on. The TV will switch to channel 1 if no number is input in 3 seconds.
The second is for tens if it is
“
2
”
,
“
12 -
”
appears on. The TV will switch to channel 12 if no
number is input in 3 seconds and the third is for ones., Press
【
OK
】
to turn to the desired
channel quickly after the corresponding number is input.
Note: This function is only available in TV mode
●
Sleep Function
Press
【
SLEEP
】
on the remote control once to
activate the function and subsequent keying in to
select the sleep time of 0, 15, 30, 45, 60,90, 120,
150,180, 240 and 0 minutes. This is will be reflected in
the top right hand corner of the screen. After this step
is done, press
【
SLEEP
】
to view the set sleep. See the
illustration in the right.
●
Indicator Light
Status Light
Colour
Description
On/Off
Off
The TV works normally/is power off
Standby
Red
In Standby Mode
Timer On/Off Or Sleep
Green
Timer On/Off is valid or Sleep is on
Sleep (PC)
Yellow
Sleep for power-saving;
Receives signal from
the remote control
Flickering
The indicator will flicker when the TV
receives signal from the remote control
Sleep 30
1
5
