4
Note:
-Depending on the device manufacturer, you need to perform the registration (PAIRING) again
to connect the devices.
- In case of problems with the pairing of a playback device, Deactivate The WiFi-/and mobile
data function in your playback device.
-The Bluetooth compatibility cannot be ensured for devices (e.g.Mobile phones) getting
released in the future.
-To ensure an optimal connection, Make sure that the battery of your player is completely
charged.
-Some of The mobile phone brands have an energy-saving mode. Deactivate the
energy-saving mode as it can otherwise result in problems during the data transfer through
Bluetooth.
-If a mobile phone on which you are playing music receive a call,The music will be interrupted.
Press the Phone button to accept the call. The sound is replayed by the loudspeakers. Speak
into the microphone on the device or transfer the conversation to your mobile phone. To do this,
observe the overlay in the display of the mobile phone. After you have ended the call, the
devices are connected to each other again and playback continues.
Operation
On/Off
·Turn on the Speaker by holding Standby button. The Bluetooth indicator will start to blink.
Note:
-Automatic connection If supported by your player (e.g. mobile phone), the devices will be
connected automatically. The prerequisite for this is:
1.Devices were already paired with each other.
2.Bluetooth Is Activated In Your Player.
·Hold the Standby button to turn off the Speaker .The units are disconnected.
Adjust Volume
·Press the /- buttons to set the desired volume.
Note:
-The volume on the playback device may not be set too low or too high. It could otherwise result
in background noises.
Accepting / Ending/Refusing call
·Press the Phone button to accept an incoming call.
·To end the call, press the Phone button again.
·Hold the button to refuse an incoming call
