Polaroid
●
E101W
Polaroid
●
E101W
2. Getting started
2.1 Inserting the memory card
Install a micro SD card (class 10 or higher rating, max up to
32GB) into the camera device. Press the
Power
button to switch
on the equipment.
Note:
1. Do not remove or insert the memory card when the
device is turned on. This may damage the device and
memory card.
2. Please format the micro SD card before initial use.
2.2 Information in LCM screen
EN-2
EN-3
No.
Item
Function
1
Mode button
Changing Modes (Timelapse / Capture /
Recording Mode)
2
Record button
●
In
Timelapse mode
, press the
Record
button to start recording a video. Press it
again to stop recording (When the device
enters Power Saving Mode and is in
shutdown status, press the
Power
button
to stop recording).
●
In
Camera
mode, press the
Record
button to capture a photo.
●
In
Video
mode, press the
Record
button
to start recording a video. Press it again to
stop recording.
3
Wi-Fi button
Press to turn the Wi-Fi on or off.
4
Power button
●
Press to turn the camera on or off.
●
To reset, press and hold the
Power
button for at least 5 seconds.
Note:
If you want the recorder to go back to the
Default Setting
,
make sure the camera’s Wi-Fi is turned off. Press and on-
hold the
Mode
button, then press the
Wi-Fi
button, when
the beep tone is promoted, which indicates the completion
of factory settings.
1
2
3
No.
Item
Icon
Description
1
Battery
status
Full battery power
2/3 battery power
1/3 battery power
Out of battery power
Charging
2
Wi-Fi
status
Wi-Fi on
Wi-Fi off