Digital UHD LED TV
43GSR4100KN
If you need additional information on your new Television, complete instruction manuals are available for reference and download in our SUPPORT section online at www.polaroidhdtv.com
PLEASE
READ
THIS
BEFORE REMOVING
PRODUCT FROM
THE BOX
We’ve provided:
A. LED TV
B. Stand
C. Screws
If you prefer to wall mount your
TV, do not attach the stand.
Use the instructions in your
wall-mounting kit (not included).
Mounting on the wall
NOTE
Remove the base stand before
mounting the unit on the wall.
TROUBLESHOOTING
Check and make sure the Video output from the connected device is set to HD (High
Definition) and the Audio output is set to PCM (Plus Code Modulation). For details,
refer to the Instruction Manual of the connected device.
Forgotten the
preset parental
lock password
The TV turn off
automatically.
No Signal Auto Power off was set to on, when no was received
within 30 minutes, the TV will turn off automatically.
Use the master password 1470 to reset a new password
.
and / or
1. POWER
Turns the LED TV on and off (standby mode).
2. MTS
In NTSC receiving mode, press to select. the audio modes to Mono, Stereo or SAP.
In ATSC Digital receiving mode, press to display the audio selection menu on the screen. Using
the Navigator▲,▼button to select the desire audio mode.
3. S.MODE
Sound Mode, press repeatedly to select the presetting sound effect modes.
4. P.MODE
Picture Mode, press repeatedly to select the preset picture modes.
5. SLEEP
Press repeatedly to activate and/or set the sleep timer.
6. ASPECT
Press repeatedly to select the aspect ratio of screen as desired.
7. 0-9
Numeric buttons.
8. —.
Select channel with two digits.
9. RECALL
Recall Mode.
10. VOL+/VOL-
Press to increase or decrease the volume level.
11. CH+/CH-
Press to increase or decrease the channel number.
12. Turn off the sound temporary. Press again to turn the sound back.
13. Play/Pause picture
.
14. DISPLAY
Press to display the information; settings and the status of current mode/station
on the screen
.
15. SOURCE
Press to display the source menu on the screen. Using the Navigator ▲ or ▼
buttons to select the source as desire then press (ENTER) button to confirm your selection.
16. ▲▼ ►◄/ ENTER
Press to move the cursor within the setting menu. ENTER Press the
ENTER button to confirm the selection. Press the "ENTER" button, the check mark
will appear to the channel , and the channel is marked as channel list.
17. MENU
Displays the setting menu on the screen.
18. EXIT
Press to exit from the setting menu.
19. Google cast
Enter cast connect surface
20. EPG
Press to display the Electronic Program Guide in digital TV channels(Operation in
ATSC mode only functions on signals emitting from TV station) .
21. ADD
In FAV display mode, press to increase or delete the highlighted channel.
22. FAV+.
Next favourite channel.
23. CC
Press repeatedly to activate and/or set the CC (Closed Caption Display) modes.
24
.
FAV.
Show the list of favorite channels.
25.FAV-
.Previous favourite channel.
IMPORTANT SAFELY INSTRUCTIONS
a.
Use No.10AWG(5.3mm²)copper,No.8AWG(8.4mm²)aluminun,No.17AWG(1.0mm²)
conper-clad steel or bronze wire,or larger,as a ground wire.
b.
Secure antennal lead-in and grounding wires to house with insulators spaced forom
4-6 feet (1.22-1.83m) apart.
c.
Mount antenna discharge uint as close as possible to where lead-in enters house.
d.
Use jumper wire ont smaller than No.6AWG(13.3mm²)copper,or the equivalent,when
a separate antenna grounding electrode is used.
Empire Electronic Corporation
5550 Jurupa St, Ontario, CA 91761
www.polaroidhdtv.com
1-888-636-8599
Questions
？
Simple Steps for Attaching Your TV Stand
1
2
3
4
5
6
7
8
9
0
SOURCE
T
I
X
E
U
N
E
M
CH
.
V
A
F
C
C
P.MODE
S.MODE
SLEEP
ASPECT
MTS
RECALL
EPG
-
V
A
F
+
V
A
F
ADD
6
4
3
1
7
8
10
13
14
16
17
19
20
23
22
5
9
11
15
18
21
24
25
12
2
Setup Wizard
Screws(2
）
4*15BAH
Screws(2)
4*15BAH
This unit is VESA-complian,and is
designed to be wall-mounted with
a VESA-compliant 7.87"x7.87"(200
mmx200mm) mounting kit designde
for flat-panel TVs(not supplied).
Mount this unit according to the
instructions included in the monting
kit. Length of screw should not
exceed 10 mm
7.87"
7.87"
Four mounting holes
(Size M6 screw)
