16 I
k
Symptoms
Solution
Turn
on
the
power
on/off
switch
Turn on another channel, the broadcast may be distorted
Check the antenna connection
There may be a break in the antenna cable
Change the antenna direction
There may be a regional problem in the
Fine tuning may be required
Brightness setting may be required
Contrast setting may be required
The channel may not be broadcasting in colors
Color adjustment may be required
Check the batteries
Try powering on and off the TV
No picture and sound
√
√
√
√
√
No sound, picture available
√
√
√
No picture, sound available
√
√
√
√
√
√
Low quality picture
√
√
√
√
√
Foggy picture
√
√
√
√
Double picture
√
√
√
√
√
Line on the picture
√
√
√
√
√
Distorted picture
√
√
√
√
Distorted broadcast on some channels
√
√
√
√
√
√
Horizontal lines exist
√
√
√
Vertical fluttering in the picture
√
√
√
√
Weak color
√
√
√
√
√
√
√
√
√
No color
√
√
√
√
√
√
√
The remote control does not function
√
√
TV does not respond to the commands
√
Fluttering in the teletext
√
10
Help and tips
The television does not function
Make sure that the power cable of the
television is connected to the mains and the
power on-off switch is turned on.
Poor picture quality
• Is the antenna cable connected?
• If you are using a satellite antenna, has
the antenna been adjusted to receive
broadcast in the best way?
• Make sure that the antenna is far from
devices that emit electromagnetic waves.
(Neon lights, loudspeakers etc.)
• Try changing the direction of the external
antenna. High buildings and mountains
can cause a faded picture or ghosting
(double picture).
• The picture quality can be affected when
two external devices are connected. Try
disconnecting one of the devices.
• Try adjusting the fine tuning.
No picture
• Is the antenna connected correctly?
• Is there any damage to the antenna
cable?
• Are the plugs on the antenna cable
connected correctly?
• Are you sure that you have pressed the
correct button on the remote control?
No sound
• Temporary sound mute may be on. Try
pressing the mute button.
• Is the sound turned down?
The remote control does not
function
• Try replacing the batteries.
• Make sure that there are no obstructions
between the remote control and
television.
If your television does not work properly
even though you tried the above mentioned
solutions, try turning it on and off again. If
you cannot start your television even though
you have applied all noted methods, refer to
the dealer or authorised service from where
you purchased the product. Never attempt
to repair a faulty device yourself.
