6. To turn the light on and off, move the switch on the bottom
of the product to the
On
or
Off
position.
7. The product comes with a
timer function
. After burning for
approx. 5 hours, the product turns off automatically and then
turns back on 19 hours later.
Example:
Slide the on/off switch to
Timer
at 3:00 pm. The
light will turn on from 3:00 pm to 8:00 pm and then switch
off automatically. It will turn back on again at 3:00 pm on the
following day. This cycle is repeated provided that the on/
off switch is set to the
Timer
position and there is sufficient
battery power remaining.
8. If you do not plan to use the product for an extended period,
turn it off and remove the batteries.
Inserting the batteries
Replace the batteries if the LED stops working.
Ensure that no liquids get into the interior of the battery
compartment when changing the batteries.
• Ensure that the on/off switch is set to the
Off
position before
opening the battery compartment.
• Remove the battery compartment cover.
• Remove the used batteries.
• Insert two new AA-batteries. We recommend using high-quality
batteries. Ensure that the batteries are inserted in the correct
polarity ( "+" = positive; "-" = negative), as indicated in the
battery compartment.
• Close the battery compartment. The battery compartment
cover must audibly click into place.
