b)
Specific safety
•
This LED post light must be assembled and installed by a qualified electrician.
•
Disconnect the power supply before installation.
•
The product is only suitable for fixed installation.
•
Operate the product only via a common household power supply of
220 – 240 V/AC, 50 Hz.
•
Do not operate the product with a dimmer.
•
Never point a garden hose at the product.
•
The product may not be mounted in or under water.
•
The product must not be used in areas prone to flooding. The same applies to
areas (e.g. troughs), in which rainwater can collect.
•
Risk of electric shock. Do not install near a pool, spa or water fountain.
•
For installations in industrial facilities, follow the accident prevention regulations
for electrical systems and equipment of the government safety organization or the
corresponding authority for your country.
•
Do not use with a broken shade. Replace a broken shade by a new one before
using the light again.
•
If LED fails you should replace the entire fitting.
• Attention, LED light:
-
Do not look directly into the LED light!
-
Do not look into the beam directly or with optical instruments!
Operating Elements
1
2
4
3
1
LED protective glass
2
PIR Sensor (Item No. 1499892)
3
PIR adjustment dials:
SENS
/
TIME
(Item No. 1499892)
4
Mounting holes
Preparing installation
Installation of the product must be carried out by a qualified professional (i.e. an
electrician) who is familiar with all applicable regulations!
By handling mains voltage improperly, you endanger not only yourself but also
others!
If you do not have the relevant expert knowledge, do not install the product yourself,
but have it done by a professional.
•
The product is suitable for use in unprotected outdoor areas. It must however not be used in
or under water. This poses a risk of fatal electric shock!
•
Protect the product from salt water (e.g. road salt in wintertime) in order to prevent corrosion.
•
Mount the product to a horizontal surface only.
•
Do not mount the product to or inside vehicles.
•
When mounting the product, take into consideration the routing of the mains cable.
•
Only use a suitable, fixed mains cable for power supply.
•
A suitable switch is required for turning the product on and off.
•
The product must be secured via an existing sub-distribution unit with a 10/16A fuse. This
setup requires the installation of an upstream residual current circuit breaker (FI switch).
•
The product must be completely free of voltage for installation. Just turning off the light via the
switch does not make it entirely voltage-free.
•
Turn off the corresponding circuit breaker and/or automatic fuse to remove all voltage from
the power circuit. Secure them against unauthorized restart, e.g. by installing a warning sign.
Also switch off the relevant circuit breaker in order to disconnect all poles of the mains cable
from the mains supply.
•
Check the power circuit for any remaining voltage using an appropriate measuring device.
Operating Instructions
LED Post Light, 900 Lumen, IP44
Item No. 1497354 / without PIR / 11 W
Item No. 1499892 / with PIR / 11.5 W
Intended Use
The product is suitable for outdoor installation (protection type IP44) and is intended for
lighting entrance areas, patios, etc. The PIR sensor will activate the light when movement is
detected.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged. In
addition, improper use can result in short circuits, fires, electric shocks or other hazards. Read
the instructions carefully and store them in a safe place. Make this product available to third
parties only together with its operating instructions.
This product complies with the statutory national and European requirements.
All company names and product names are trademarks of their respective owners. All rights
reserved.
Delivery Content
•
Lamp
• 3x screws
• 3x dowels
•
Operating instructions
Up-to-date Operating Instructions
Download the latest operating instructions at
www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Explanation of Symbols
The symbol with the lightning in the triangle is used if there is a risk to your health,
e.g. due to an electric shock.
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
The light is not dimmable.
Follow the operating instructions!
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General information
•
The device is not a toy. Keep it out of the reach of children and pets.
•
Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
•
Do not place the product under any mechanical stress.
•
If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
-
is no longer working properly,
-
has been stored for extended periods in poor ambient conditions or
-
has been subjected to any serious transport-related stresses.
•
Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
•
Consult an expert when in doubt about the operation, safety or connection of the
appliance.
•
Maintenance, modifications and repairs must only be completed by a technician
or an authorised repair centre.
•
If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
