Polaris YOUTH ATV 2001 Owner'S Safety And Maintenance Manual Download Page 7

Page: 7 / 215

iii

INTRODUCTORY SAFETY MESSAGE TO PARENTS

AN ATV IS NOT A TOY AND CAN BE HAZARDOUS TO OPERATE.

An ATV handles

differently from other vehicles including motorcycles and cars. A collision or rollover

can occur quickly, even during routine maneuvers such as turning and driving on hills

or over obstacles, if you fail to take proper precautions.
Children differ in skills, physical abilities, and judgement. Some children may not be

able to operate an ATV safely. Parents should supervise their child’s use of the ATV

at all times. Parents should permit continued use only if they determine that the child

has the ability and maturity to operate the ATV safely.

Failure to follow the warnings contained in this manual can result in

SERIOUS INJURY or DEATH.

•

Read this manual and all labels carefully and follow the operating procedures de-

scribed.

•

Never operate an ATV without proper instruction.

Take a training course.

Riders

should receive training from a certified instructor. Contact an authorized Polaris

ATV dealer or call Polaris at 1-800-342-3764 to find out about the training courses

nearest you.

Summary of Contents for YOUTH ATV 2001
























































































































































































































Search results

Summary of Contents for YOUTH ATV 2001

Reviews:

Related manuals for YOUTH ATV 2001

Brands by name

Popular brands

Polaris YOUTH ATV 2001, Owner'S Safety And Maintenance Manual

Search results

Summary of Contents for YOUTH ATV 2001

Reviews:

Related manuals for YOUTH ATV 2001

Brands by name

Popular brands