Polaris WideTrak Owner'S Manual For Maintenance And Safety Download Page 118

Page: 118 / 150

115

MAINTENANCE

General Maintenance

Tool Kit

A tool kit is included with each

machine for emergency and

routine maintenance. Your tool kit

will contain only the tools

applicable to your model.
1. Emergency Start Strap

(manual start models)

2. Phillips Screwdriver
3. Tubular Socket
4. Tubular Socket Handle
5. Wrench
6. Flat Screwdriver
7. Box End Wrench

Always keep the tool kit with the snowmobile.

If necessary, a replacement tool kit may be purchased from your Polaris

dealer.

Chain Tension

Maintain the proper chain tension as outlined on page 101.

Oil Level

Maintain the oil level between the safe marks as indicated on the oil

bottle (see page 66).

Summary of Contents for WideTrak























































































































































Search results

Summary of Contents for WideTrak

Reviews:

Related manuals for WideTrak

Brands by name

Popular brands

Polaris WideTrak, Owner'S Manual For Maintenance And Safety

Search results

Summary of Contents for WideTrak

Reviews:

Related manuals for WideTrak

Brands by name

Popular brands