Polaris WI-FI IQ Home Aqua PVCR 0735, Operation Manual, Page: 27 / 143

27

Click on "Settings Access" to open the Wi-Fi settings on your phone

Connect your phone to Wi-Fi network coinciding with the vacuum cleaner name (PVCR-0735)

Return to the application

Then follow prompts in the next screen to pair the appliance:
1. Press and hold the "Auto" button until two beeps and wait 10 seconds after that.
2. Then click on "Continue" in the application

In the screen that opens, select the desired action: "Leave the configuration and continue" - in this
case, the kettle will remain configured for the current WiFi network, but your phone will be able to
control it via the Internet, or "Reconfigure the device" - in this case, you will be asked to reconfigure
the device to a new WiFi network.

If you have selected "reconfigure device": enter the name and password of the WiFi network you
want to configure the device on, and click "Connect".

Wait until the configuration procedure completion.
For phones with operating system IOS:
New appliance configuration

The "Home" screen: click on "Add Appliance".

Select the vacuum cleaner (PVCR-0735) in the "All Appliances" list

Click on "Continue"

The application prompts you to establish connection with WiFi-network “PVCR-0735”, click on
"Connect"

Then follow prompts in the next screen to pair the appliance:
1. Press and hold the "Auto" button until two beeps.
2. Then click on "Continue" in the application

This causes displaying available WiFi networks. Select a sought network and type in password of
WiFI network you want to set the appliance for, then click on "Next"

Wait until the configuration procedure completion.

Click on "Continue"
Pairing a previously configured appliance:

The "Home" screen: click on "Add Appliance".

Look through the "Next to You" list to select the vacuum cleaner (PVCR-0735) (If the appliance in
absent, make sure your mobile device is connected to the WiFi network the applicance is configured
for).

Then follow prompts in the next screen to pair the appliance:
1. Press and hold the "Auto" button until two beeps.
2. Then click on "Continue" in the application
The appliance reconfiguration for another Wi-Fi network (diagnostics mode):

Press and hold the "Auto" button until two beeps and wait 10 seconds after that.

Click on "New Appliance" on the "Home" screen.

Select the vacuum cleaner (PVCR-0735) in the "All Appliances" list.

Click on "Continue"

The application prompts you to establish connection with WiFi-network “PVCR-0735”, click on
"Connect"

Then follow prompts in the next screen to pair the appliance:
1. Press and hold the "Auto" button until two beeps and wait 10 seconds after that.
2. Then click on "Continue" in the application