Polaris Victory Special Edition 2000 Owner'S Manual Download Page 14

Page: 14 / 76

SAFETY INFORMATION

Fuel

WARNING

Gasoline is extremely flammable and explosive under certain conditions.

Always stop the engine and refuel outdoors or in a well ventilated area.

Do not smoke or allow open flames or sparks in or near the area where re-
fueling is performed or where gasoline is stored.

Do not overfill the tank. Do not fill the tank neck above the fuel tank insert.
Leave air space to allow for fuel expansion.

If you get gasoline in your eyes or if you swallow gasoline, see your doctor
immediately. Never try to syphon gasoline using mouth suction.

If you spill gasoline on your skin or clothing, immediately wash it off with
soap and water and change clothing.

Never start the engine or let it run in an enclosed area. Gasoline powered
engine exhaust fumes are poisonous and can cause loss of conscious-
ness and death in a short time.

WARNING

The engine exhaust from this

product contains chemicals

known to cause cancer, birth de-

fects or other reproductive harm.

ProCarManuals.com

Summary of Contents for Victory Special Edition 2000













































































Search results

Summary of Contents for Victory Special Edition 2000

Reviews:

Related manuals for Victory Special Edition 2000

Brands by name

Popular brands

Polaris Victory Special Edition 2000, Owner'S Manual

Search results

Summary of Contents for Victory Special Edition 2000

Reviews:

Related manuals for Victory Special Edition 2000

Brands by name

Popular brands