background image

146

WARRANTY

Polaris Second Year Engine Service Contract

Second Year Engine Service Contract is standard on all eligible new and unused snow-

mobiles that were Snow Checked through an authorized Polaris dealer during the 

March/April Snow Check promotion.  The free Second Year Engine Service Contract is 

honored by all authorized Polaris snowmobile dealers in North America and is transfer-

able 120 days after the original purchase date, free of charge, through any Polaris snow-

mobile dealer. Coverage on Snow Check units is automatic.  Although you do not 

receive a warranty card, your dealership should have printed a copy of the warranty reg-

istration form.  This form is your proof of warranty. 

Consumer Exclusions

• Each repair visit after the first twelve months of standard warranty coverage is sub-

ject to a $50 deductible.

• The free Second Year Engine Service Contract applies to the first 5,000 miles or two 

(2) calendar years from date of purchase, whichever comes first.  Tampering with the 

odometer shall void all warranties/service contracts.  No extensions to coverage 

under this engine service contract can be given.  Used snowmobiles are not eligible 

under this program.

• Snowmobiles used for commercial purposes or for racing are excluded from cover-

age.

Summary of Contents for Trail Touring 2006
































































































































































Reviews: