Instr 9927953
Rev 01 2017-07
Page 2 of 8
REF
QTY
PART DESCRIPTION
PART NUMBER
10
2
Screw - SPCL - M6 X 1.0 X 20
7520464
11
6
Nut - M6 X 1.0
7547453
1
Instructions
9927953
TOOLS REQUIRED
• Safety Glasses
• Socket Set, Metric
• Wrench Set, Metric
• Socket Set, Torx
®
Bit
• Torque Wrench
IMPORTANT
Your Titan
™
Ice Auger Rack Kit is exclusively designed for your vehicle. Please read the installation instructions
thoroughly before beginning. Installation is easier if the vehicle is clean and free of debris. For your safety, and to
ensure a satisfactory installation, perform all installation steps correctly in the sequence shown.
ASSEMBLY TIME
Approximately 30 minutes
NOTE
Additional time may be required for optional steps, or
to accommodate other installed accessories.
INSTALLATION INSTRUCTIONS
COMPONENT REMOVAL
1. Remove tail light
A
by removing two screws
B
and unplugging tail light from harness. Set aside
for later use.
2. Remove rear cargo platform
C
by removing ten
screws
D
.
3. Remove rear rack support
E
by removing six nuts
F
.
