Polaris Sportsman Touring 570 EPS 2021 Owner'S Manual Download Page 129

Page: 129 / 186

FOOT BRAKE

Check the brake fluid level frequently for the foot brake system. The foot brake
fluid reservoir

is located under the seat.

1. Position the vehicle on a level surface.

2. Remove the seat.

3. View the fluid level in the reservoir.

4. Remove the cap and add the recommended fluid as needed.

5. Maintain the fluid level between the minimum

and maximum

marks. Do

not overfill.

6. Reinstall the reservoir cap.

7. Reinstall the seat.

127

MAINTENANCE

Downloaded from

ManualsNet.com

search engine

Summary of Contents for Sportsman Touring 570 EPS 2021



























































































































































































Search results

Summary of Contents for Sportsman Touring 570 EPS 2021

Reviews:

Related manuals for Sportsman Touring 570 EPS 2021

Brands by name

Popular brands

Polaris Sportsman Touring 570 EPS 2021, Owner'S Manual

Search results

Summary of Contents for Sportsman Touring 570 EPS 2021

Reviews:

Related manuals for Sportsman Touring 570 EPS 2021

Brands by name

Popular brands