Polaris Sportsman 9922237 Owner'S Manual Download Page 133

Page: 133 / 145

129

WARRANTY

WARRANTY COVERAGE AND EXCLUSIONS:
LIMITATIONS OF WARRANTIES AND REMEDIES

The Polaris limited warranty excludes any failures that are not caused by a defect in

material or workmanship. This warranty does not cover accidental damage, normal wear

and tear, abuse or improper handling. This warranty also does not cover any ATV that

has been altered structurally, modified, neglected, improperly maintained, used for rac-

ing, or used for purposes other than for which it was manufactured, or for any damages

which occur during trailer transit or as a result of unauthorized service or the use of

unauthorized parts. In addition, this warranty does not cover physical damage to paint or

finish, stress cracks, tearing or puncturing of upholstery material, corrosion, or defects in

parts, components or the ATV due to fire, explosions or any other cause beyond Polaris'

control.

Warranty does not apply to parts exposed to friction surfaces, stresses, environmental

conditions and/or contamination for which they were not designed or not intended,

including but not limited to the following items:

Warranty applies to the product only and does not allow for coverage of personal loss.

Some items are considered "consumable," meaning they are considered part of normal

maintenance or part of completing an effective repair. The following items are excluded

from warranty coverage in the event of a warranty claim:

• Wheels and tires

• Finished and unfinished surfaces

• Suspension components

• Carburetor/Throttle body components

• Brake components

• Engine components

• Seat components

• Drive belts

• Clutches and components

• Hydraulic components

• Steering components

• Circuit breakers/Fuses

• Batteries

• Electronic components

• Light bulbs/Sealed beam lamps

• Spark Plugs

• Lubricants such as oil, grease, etc.

• Filters

• Batteries (unless defective)

• Fuel

• Cosmetic damage/repair

• Sealants

• Coolants

• Hotel fees

• Meals

• Towing charges

• Shipping/ handling fees

• Mileage

• Product pick-up/delivery

• Rentals/Loss of product use

• Loss of vacation/personal time

Summary of Contents for Sportsman 9922237


















































































































































Search results

Summary of Contents for Sportsman 9922237

Reviews:

Related manuals for Sportsman 9922237

Brands by name

Popular brands

Polaris Sportsman 9922237, Owner'S Manual

Search results

Summary of Contents for Sportsman 9922237

Reviews:

Related manuals for Sportsman 9922237

Brands by name

Popular brands