manualshive.com logo in svg

Polaris Sportsman 850 Touring EPS, Owner'S Manual

Share
Download
Polaris Sportsman 850 Touring EPS Owner'S Manual Download Page 16

14

SAFETY

Safety Warnings

Protective Apparel

Riding in this vehicle without wearing an 
approved helmet and protective eyewear 
increases the risk of a serious injuries in the 
event of an accident.

Operator and passenger must always wear 
an approved helmet that fits properly and eye 
protection (goggles or face shield).

Carrying a Passenger

Carrying a passenger on a 1-up ATV greatly 
reduces the operator's ability to balance and 
control the ATV, which may result in an 
accident or overturn. Never carry a passenger 
on a 1-up ATV.

Do not carry a passenger on a 2-up ATV until 
you have at least two hours of driving 
experience with the vehicle.

Carrying More Than One 
Passenger on a 2-Up ATV

Carrying more than one passenger on a 2-up 
ATV greatly reduces the operator's ability to 
balance and control the ATV, which may 
result in an accident or overturn. Never carry 
more than one passenger on a 2-up ATV.

Using Alcohol or Drugs

Operating the ATV after consuming alcohol 
or drugs could adversely affect operator 
judgment, reaction time, balance and 
perception.

Never consume alcohol or drugs before or 
while operating an ATV.

Summary of Contents for Sportsman 850 Touring EPS








































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands