Polaris Sportsman 700 HO 2004 Owner'S Manual Download

Page: 39 / 139

CONTROLS

Throttle Lever

Engine speed and vehicle

movement are controlled by

pressing the throttle lever (1).

The throttle lever is spring

loaded. Engine speed returns

to idle when the lever is

released.
This ATV is equipped with Polaris Electronic Throttle Control (ETC),

which is designed to reduce the risk of a frozen or stuck throttle. If the

throttle cable should stick in an open position when the operator

releases the throttle lever, the engine will stop, and power to the rear

wheels will cease.

Operating an ATV with sticking or improperly operating throttle

controls could cause an accident and lead to severe injury or

death.
Never start or operate an ATV with a sticking or improperly

operating throttle. Always contact your dealer for service if throttle

problems arise.
Failure to check or maintain proper operation of the throttle

system can result in an accident if the throttle lever sticks during

operation. Always check the lever for free movement and return

before starting the engine. Also check occasionally during

operation.

WARNING

The Electronic Throttle Control (ETC) stops the engine in the

event of a throttle system malfunction and is provided for your

safety. Do not attempt to modify the ETC system or replace it

with any after market throttle mechanisms.

WARNING

Summary of Contents for Sportsman 700 HO 2004












































































































































Search results

Summary of Contents for Sportsman 700 HO 2004

Reviews:

Related manuals for Sportsman 700 HO 2004

Brands by name

Popular brands

Polaris Sportsman 700 HO 2004, Owner'S Manual

Search results

Summary of Contents for Sportsman 700 HO 2004

Reviews:

Related manuals for Sportsman 700 HO 2004

Brands by name

Popular brands